NVIDIA
M60 set to graphicsmode but still show compute
Hi, I have one M60 in Xenserver 7.2, I have set to gpugraphics (I have done same to a few xenserver system before which are working fine). However, this particular one seems to be stuck in compute mode, shown in Nvidia Utility. I'm doing GPU Passthrough and windows 2016 LSTB, and the 3D performance is very bad. Unable to link image directly. https://filedn.com/l3TGy7Y83c247u0RDYa9fkp/temp/nvidia/m60.jpg
Hi,

I have one M60 in Xenserver 7.2, I have set to gpugraphics (I have done same to a few xenserver system before which are working fine). However, this particular one seems to be stuck in compute mode, shown in Nvidia Utility. I'm doing GPU Passthrough and windows 2016 LSTB, and the 3D performance is very bad.

Unable to link image directly.


https://filedn.com/l3TGy7Y83c247u0RDYa9fkp/temp/nvidia/m60.jpg

#1
Posted 12/21/2017 09:12 AM   
And how do you know that the M60 is still in compute mode when gpumodeswitch shows graphics mode? You should use lspci command to check for graphics mode on hypervisor level.
And how do you know that the M60 is still in compute mode when gpumodeswitch shows graphics mode?
You should use lspci command to check for graphics mode on hypervisor level.

#2
Posted 12/21/2017 11:05 AM   
Did you try to use the gpumodeswitch from the boot cd?
Did you try to use the gpumodeswitch from the boot cd?

#3
Posted 12/22/2017 10:35 AM   
the 3d performance was slow, that's why I suspected it is in compute mode. But after some testing, I used the telsa driver from public nvidia site, that is causing the problem. I switched back to older driver I gotten from nvidia portal, and its working. Thanks and merry christmas!
the 3d performance was slow, that's why I suspected it is in compute mode. But after some testing, I used the telsa driver from public nvidia site, that is causing the problem. I switched back to older driver I gotten from nvidia portal, and its working. Thanks and merry christmas!

#4
Posted 12/24/2017 11:10 AM   
Scroll To Top

Add Reply